Tele System Hello Quick Start Manual page 10

10
4. Connect your device to the Wi-Fi network created by Hello, for iOS devices you must manually access WI-FI settings to
detect available networks while Android devices can access WI-FI settings page directly from the atHOME Control
application.
5. Return to atHOME Control application and login to the session "Wi-Fi device Settings"; within this session you will see
the available WI-FI networks (from the router installed), select the one you want and enter the password. Be very careful
to enter password and confirm. Hello will reboot automatically and will connect to the selected wireless network.
6. Connect your mobile device to the WI-FI network to which Hello has been associated.
7. The atHOME Control application will propose the Hello settings page, you can rename it; enter the default password
888888and confirm.
8. Now, through Hello, you can communicate directly with the visitor, but also check the area covered by the camera, record
images and video directly with mobile device even remotely, again thanks to the atHOME Control.
NOTE
The following diagram illustrates the steps for a smartphone/tablet Android. The procedure with an iOS device is similar except
the connection point to the network created by Hello.
TELE System