Advertisement
Installing a Seat Pad
Optional Seat Pad
An optional harness seat pad is available. Please contact
your sales person or Miller Customer Service for more
information.
Installing Seat Pad
Make sure the flat side of the
1
seat pad is facing towards the
back of the harness, then at-
tatch the two snap straps in the
middle of the butt strap.
Next, thread the front snap retaining straps at the front of the
2
pad over the leg strap, under the butt strap, and in between the
two tacks next to the pivot link. Make sure the seat pad adjust-
ment strap goes under the harness webbing.
Thread the cinch-through strap
3
down through the slot in the
D-ring, then cinch back through
itself.
4
Snap the two ends of the buckle together.
Us er In stru ctio ns - Engli sh
9
Advertisement
