3
INSTALLATION
3.1 Unloading/transport
within the building site
Important!
All transport should be carried out with the cooling unit
in the horizontal position.
3.1.1 Lifting using a forklift truck
Warning
The unit has a high centre of gravity! Carefully lift the
cooling unit!
3.1.2 Lifting using a crane
Position two line spreaders at the upper side of the cooling
unit and two under the underside of the pallet or under
the cooling unit and lift in the pallet (or in the base frame
of the cooling unit if the unit is not delivered on a pallet).
See sketch.
6
www.swegon.com
3.2 Arrangement
Position the CoolDX cooling unit at suitable place in the
fan room.
Allow an open space around the safety isolating switch/
mains power switch for servicing in accordance with appli-
cable electrical safety regulations.
The unit can be positioned with its backside against a wall;
however it is advisable to position it at a distance of ap-
prox. 1 metre away from a wall to make it easier to service
the rear compressor.
We reserve the right to alter specifications.
GB.COOLDX.INST.090301