Installation: Adjusting The Cylinder Body To The Door Thickness; Extending The Inside - Abus AWLX PRO Installation Instructions And User Manual

3. Installation: Adjusting the cylinder body to the door thickness

3.1 Extending the inside

Removing the core retaining ring
Remove the core retaining ring (6) on the outer
cylinder body (5) using the WLX Pro opening pliers
(a).
Removing the shaft
Remove the shaft end piece (12) from the outer
cylinder body (5)
Releasing the cylinder body
Remove the grub screw in the outer cylinder body (5)
using the hexagon key (d)
Removing the cylinder body
Remove the outer cylinder body (5) from the inner
extension connector (8)
– installation instructions and user guide
wAppLoxx Pro
[16]