Installation From The Inside - Abus AWLX PRO Installation Instructions And User Manual

2.2 Installation from the inside

The cylinder must be installed from the inside for the following variants:
•
WLX-PRO-LB
•
WLX-PRO-LA-P
•
WLX-PRO-LA OPZ
– installation instructions and user guide
wAppLoxx Pro
[13]
wAppLoxx Pro as delivered
Outer cap (1) and inner knob (13) are installed. The
battery (2) is not yet inserted. The cam (10) is coupled to
prevent accidental locking. There are 8 electronic screws
in the scope of delivery, which are used to attach the
knob.
Removing the outer cap
The entire outer knob (1+3) must be removed in order to
insert the wAppLoxx Pro into the lock from the outside.
Firstly, remove the outer cap (1)
Removing the electronic knob 1
After removing the outer cap, the electronic knob (3.1)
must be removed. After this, remove the PCB bracket
(3.1) from the basket (3.2) and remove the basket (3.2)
from the shaft including the mounting plate (4).
Fitting the wAppLoxx Pro in the door
Once the outer knob (1) has been removed, the
wAppLoxx Pro can be pushed through the door leaf from
the inside. Fix the wAppLoxx Pro in the lock case with the
forend screw like a mechanical locking cylinder.