Data FElds On The Map; SelectNg DesRed On-Screen Data - Garmin 500W Series Pilot's Manual & Reference

Data Fields on the Map
The "Data Fields On?" option provides a map
display (shown at right) with five user-selectable data
fields along the right-hand side of the screen. Select
this option when you wish to display additional on-
screen data — such as destination waypoint name
(WPT), desired track (DTK), ground track (TRK),
distance to destination (DIS) and ground speed (GS).
If this option has been selected and the data fields
are being displayed, "Data Fields Off?" appears as an
option instead.
"Data Fields On?" adds five user-selectable
data fields to the right-hand side of the page.
Select "Change Fields?" to change any of
these fields to a different data type.
To turn the data fields on (or off), turn the large
right knob to highlight "Data Fields On?" (or
"Data Fields Off?") and press ENT.
190-00357-00_0B 500W Pilot Guide41 41
Selecting Desired On-Screen Data
"Change Fields?" allows you to choose the data dis-
played on the five user-selectable data fields along the
right-hand side of the map page (see previous page).
There are a number of available data types, including
bearing to destination, distance to destination, esti-
mated time of arrival, ground speed, minimum safe
altitude and track. See Section 12 for descriptions of
these (and other) navigation terms.
To change a data field:
Press MENU (wth the Map Page dsplayed).
1.
2. Turn the large right knob to hghlght
"Change Felds?" and press ENT.
Once "Change Fields?" is selected, turn the
large right knob to highlight the data field
you wish to change, then turn the small right
knob to select the type of data to display in
Turn the large right knob to hghlght the
3.
data field you wsh to change.
Turn the small right knob to select the type
4.
of data you want to appear on ths field and
press ENT.
5. Press the small right knob to remove the
cursor.
190-00357-00 Rev B
2 - NAV PAGES
Data Fields on the Map
that field.
41
9/7/2007 3:10:04 PM