Map Setup - Garmin 500W Series Pilot's Manual & Reference

Map Setup

"Setup Map?" allows you to configure the map
display to your preferences, including map orientation,
land data enable/disable, Jeppesen data enable/disable,
automatic zoom, airspace boundaries, and text size.
The following table lists the group names and available
settings:
Feature
Map
Weather*
Traffic*
Lne/Road
Waypont
Arspace
Cty/Other
* Weather and Traffic settings are only available when the
500W-series unit installation includes connection to traffic
and/or weather information sources. See 400W/500W Series
Display Interfaces Pilot's Guide Addendum.
190-00357-00_0B 500W Pilot Guide39 39
Description
Orentaton, AutoZoom, Land Data,
Avaton Data, Wnd Vector
Lghtnng Mode, Lghtnng Symbol
Traffic Mode, Traffic Symbol, Traffic Label
Actve Flght Plan/Drect-To, Lat/Lon
Grd, Freeways, Natonal Hghways,
Local Hghways, Local Roads, Ralroads
Actve Flght Plan Wayponts, Large/
Medum/Small Arports, Intersectons,
NDBs, VORs, User Wayponts,
Waypont Text
Class B, Class C, Class D, Restrcted,
MOA, Other, (TFR f GDL 69 equpped)
Large/Medum/Small Ctes and Text,
State/Provnce Boundares, Rvers/Lakes
To change a map setup feature:
Press MENU (wth the Map Page dsplayed).
1.
2. Turn the large right knob to hghlght "Setup
Map?" and press ENT.
3. To change map orentaton: Turn the small
right knob to select "Map" and press ENT.
Turn the large right knob to hghlght the
"Orentaton" field, then turn the small right
knob to select the desred opton . Select
"North up" to fix the top of the map dsplay to
a north headng. Select "Track up" to adjust the
top of the map dsplay to your current ground
track. Select "DTK up" to fix the top of the map
dsplay to your desred course. Press ENT to
accept the selected opton.
4. To enable/dsable automatc zoom: Turn the
small right knob to select "Map" and press
ENT. Turn the large right knob to hghlght
the "Auto Zoom" field and turn the small
right knob to select "On" or "Off". Press ENT
to accept the selected opton. The automatc
zoom feature automatcally adjusts the map
scale from 2000 NM through each lower scale,
stoppng at 1.0 NM as you approach your
destnaton waypont.
5. To enable/dsable all background land data or
Jeppesen avaton data: Turn the small right
knob to select "Map" and press ENT. Use the
large right knob to hghlght the appropr-
ate field and turn the small right knob to
select "On" or "Off". Press ENT to accept the
selected opton.
190-00357-00 Rev B
2 - NAV PAGES
Map Setup
39
9/7/2007 3:10:03 PM