Care And Cleaning - Atag VA6311SF User Manual

24
• Make sure that cutlery and dishes do not
bond together. Mix spoons with other
cutlery.
• Make sure that glasses do not touch oth-
er glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket.
Make sure that they do not move.
• Make sure that the spray arms can move
freely before you start a programme.
Before starting a programme
Make sure that:

CARE AND CLEANING

Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.
Cleaning the filters
C
B
C
A
A
1
A
2
• The filters are clean and correctly instal-
led.
• The spray arms are not clogged.
• The position of the items in the baskets is
correct.
• The programme is applicable for the type
of load and for the degree of soil.
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
1. Turn the filter (A) counterclockwise and
remove it.
2. To disassemble the filter (A), pull apart
(A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Put the filter (B) to its initial position.
Make sure that it assembles correctly
under the two guides (C).