Settings -> Adjusting Date And Time Of The Benzing M1; Settings -> Adjusting The Contrast Of The Display; Settings -> Adjusting The Volume Of The Beep; Settings -> Enter The Name Of The Fancier - Gantner BENZIG M1 Fancier Manual

Table of Contents

Advertisement

BENZING M1 – Fancier
MENU FUNCTIONS
5.4.3 Settings -> Adjusting Date and Time of the BENZING M1
[Settings] -> [Date/Time]
Date and Time of the BENZING M1 don't have to be set manually. When the pigeons are
basketed in the club, the internal clock of the BENZING M1 is set automatically to the time
and date of the club (either the Club Antenna CAN or a connected radio clock).
But it is also possible to set date and time of the BENZING M1 manually. This is particularly
useful if, for example, no automatic clock set has been performed in a club over a longer
time period (approx. 1 month or longer). For setting date and time manually select the
menu item [Date/Time] in the system menu and set date and time with the cursor keys.
With the keys
you can change the number on the cursor position. Finally confirm with [OK].
Note: Date and time cannot be set or changed while a race or training is in progress. In
such case the menu item [Date/Time] will not be displayed.
5.4.4 Settings -> Adjusting the Contrast of the Display
[Settings] -> [Display Contrast]
In the case of varying lighting conditions adjustment of the display contrast might be
useful. If you select this menu item, a bar will be shown in the middle of the display. With
the keys
and
lower contrast and to the right means higher contrast. After adjustment confirm with [OK]
5.4.5 Settings -> Adjusting the Volume of the Beep
[Settings] -> [Beeper Volume]
The volume of the beep built into the BENZING M1 can be adjusted. Therefore select this
menu item. A bar will be shown in the middle of the display. With the keys
can move the curser below the bar to the left or right. To the left means lower volume and
to the right means higher volume. While moving the cursor you hear a tone in the
corresponding volume of the actual setting. After finishing the setting confirm with [OK]
5.4.6 Settings -> Enter the Name of the Fancier
[Settings] -> [Fancier Name]
This menu facilitates the entering of a fancier's name without a PC. Capital letters, lower
case letters, numbers and special characters can be entered.
64
and
you can move the cursor left and right. With the keys
you can move the cursor below the bar to the left or right. To the left means
and
HB_BENZING-M1_ZUECHTER-EN_20-.doc
GANTNER Pigeon Systems GmbH
and
.
you
.

Advertisement

Table of Contents
loading

Table of Contents