Installation With 1-Field G2 Antennas - Gantner BENZIG M1 Fancier Manual

BENZING M1 – Fancier
INSTALLATION AND OPERATION

3.2.1 Installation with 1-field G2 Antennas

To set-up the system, follow these steps:
1. If the system has more than one 1-field G2 Antenna, connect all the 1-field
2. Plug-in the cable of the BENZING M1 Power Supply Unit at the DB-9 plug of
3. Connect the BENZING M1 (A) with the supplied M1 Fancier Cable (C) to the
4. Connect the power supply to mains (D). The green LED "Power Supply" (G)
18
Figure 3.1 – Fancier system BENZING M1 with 1-field G2 Antennas
G2 Antennas (B) together by using the 25 cm BENZING G2 Cables (E),
which are included in the package of the antennas.
the M1 Fancier Cable (G).
first 1-field G2 Antenna by using the supplied adapter cable (F).
on the DB-9 plug will light up and the BENZING M1 will start-up.
HB_BENZING-M1_ZUECHTER-EN_20-.doc
GANTNER Pigeon Systems GmbH