Accessing Internal Components - Kontron Embedded Computers V Panel Express User Manual

Accessing Internal Components

Accessing Internal Components
This section contains important information that you must read before accessing
the internal components. You must follow these procedures properly when
installing, removing or handling any board.
Please consider following instruction when you install (or remove) expansion
cards.
The installation and removal of expansion cards have to be
carried-out only by qualified specialist personnel in accordance
with the description in this manual.
Before removing the cover to gain access to the internal
components, the system must be powered-down and the power
cord has to be disconnected from the power source.
To expand your system with additional cards, please observe
the power consumption specification specified in the "Power
Specifications" chapter and that each additional card does not
exceed 25 W power consumption.
Please observe the safety instruction for handling assemblies
with static sensitive device.
Failure to take heed of this warning instruction can result in
damage to the device.
Please consult the documentation provided by the manufacturer
of the expansion card for instructions before attempting to
install/remove an expansion card into/from the V Panel Express.
30 V Panel Express – User' Manual