Table of Contents
Advertisement
Before you calibrate the touch screen, let the unit warm up for 30
minutes.
Calibration aligns the active touch-sensitive area of the touch screen with the
image on the display. Calibration also determines the edges of the screen's image
and locates the center of the touch screen. If the touch screen is not calibrated
properly, the active area of the touch screen may not be aligned with the screen's
image or may be unnecessarily small in size.
Use the calibration tool "Align" to recalibrate the touch screen as necessary:
The installed touch screen is calibrated at the factory. Run the calibration routine
when an alignment problem exists between the mouse pointer and the contact
location on the screen.
Carefully touch the location of the markers with your stylus to recalibrate the touch
screen.
USB (2.0) Connector
This connector allows connection of USB-compatible devices.
The front side USB port with mounted plastic cover is also
protected acc. IP65.
V Panel Express – User's Manual
Product Description
17
Advertisement
Table of Contents
