Miele KFN 37452 iDE Operating And Installation Instructions page 24

Switching on and off
When the refrigerator door is opened,
the interior lighting comes on and the
LED lighting on the adjustable shelves
becomes brighter until it reaches its
maximum brightness.
When the appliance is switched on for
the first time, the sensor control for the
freezer section and the alarm
symbol  will flash until the set freezer
temperature is reached.
When the set freezer temperature is
reached, the sensor control for the
freezer section lights up constantly and
the alarm symbol  goes out.
To enable the temperature to get
sufficiently cold inside the refrigeration
appliance, allow the appliance to run
for approx. 2 hours before placing
food in it.
Do not place food in the freezer
section until it has reached the
required coldness (at least -18 °C).
24
Individual settings can be set for each
section.
 Touch the sensor control for the
section you want to adjust the
settings for.
The sensor control that has been
selected is highlighted in yellow.
For the refrigerator section, the
SuperCool and DynaCool functions can
be selected or the temperature can be
adjusted.
For the freezer section, the
SuperFreeze function can be selected
or the temperature can be adjusted.
Please refer to the relevant sections for
more information.
If another section is then selected, the
settings for the previously selected
section will remain unchanged.