Firmware Upgrade of ZTH devices
Simplest use
No special material required
Actual Upgrade version:
ZTH-GEN V4.50
Type Overview
General information
Required Material
www.belimo.eu
Firmware Upgrade
Type
Description
ZTH-GEN
Service-Tool for Belimo actuators (MF, MP, LON, MOD,...) and VAV controllers
ZTH-VAV
Service-Tool for Belimo VAV controllers
• The Firmware Upgrade may be applied only to devices listed in the type overview.
• The instructions concerning setup and workflow must be observed. Belimo assumes no
responsibility for devices, which are no longer usable due to inappropriate handling.
Material
Notebook with Windows XP / 7 and free USB interface
Level converter ZIP-USB-MP with automatic MA/MO switching,
incl. USB cable
USB device driver for ZIP-USB-MP,
driver is usually pre-installed by the Belimo PC-Tool
Connecting cable RJ12 to RJ12 (6P/6C),
e. g. Belimo ZK6-GEN (from September 2010)
Programming software "ZTH-Updater Vx_xx.exe",
Executable program incl. ZTH firmware
Optional:
- quick start guide, can be affixed to the rear of the device
- for upgrade of ZTH-VAV: Sticker "ZTH-GEN" for the front of the device
T9-ZTH Firmware Upgrade • en • 02.2013
ZTH-...
Obtaining
-
Belimo Sales
Belimo Web
Belimo Sales
Belimo Web
Belimo Sales
1 / 2
Need help?
Do you have a question about the ZTH Series and is the answer not in the manual?
Questions and answers