Table of Contents
Advertisement
Quick Links
The ZTH-GEN is a tool created to easily
adapt the fl ow settings for the ePIV in the
fi eld. It directly connects to the Belimo
actuator.
CONNECTION PROCESS:
AR, GR, AK, GK Series
Use the interface on the top of the
actuator. (Leave all of the wires of
the actuator installed.)
RE-PROGRAMMING PROCESS:
Initial Screen
Connect cable to actuator port, twist to lock in place. Will
display the handheld software and hardware versions for 5
seconds then it will display the actuator being connected
800-543-9038 USA
Technical Information
Supply
Communication
Used with actuator types
Screen 1
Start ePIV process by pressing the up arrow (ESC)
The first screen displays the MFT adress, press ESC to
continue to the next screen.
866-805-7089 CANADA
Operating Instructions
ZTH-GEN
24 VAC/DC
PP
ARB24
GRB24
AKRB24
GKRB24
203-791-8396 LATIN AMERICA
9
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Belimo ZTH-GEN
Summary of Contents for Belimo ZTH-GEN
- Page 1 Operating Instructions ZTH-GEN The ZTH-GEN is a tool created to easily adapt the fl ow settings for the ePIV in the fi eld. It directly connects to the Belimo actuator. CONNECTION PROCESS: Technical Information Supply 24 VAC/DC Communication Used with actuator types...
- Page 2 Vmax: Overrides the valve to its maximum GPM STOP: Overrides the valve to the last valve position Note: the override remains active even after you disconnect the ZTH-GEN, it is released using the AUTO command or cycling power on the actuator.
Need help?
Do you have a question about the ZTH-GEN and is the answer not in the manual?
Questions and answers