HP StorageWorks NAS 1000s Quick Start Manual page 32

Figure 4: Rapid Startup wizard screen
4. Open Internet Explorer on the Windows-based PC. Enter
http://
hyphen (
the WebUI configuration application (Rapid Startup) on the
target HP StorageWorks NAS device as shown in
Example:
Note: The NAS device will respond when the NAS operating system
has started.
5. Using the information from
follow. Verify that your information is correct when the
configuration review screen is displayed, as shown in
Figure
32
, the serial number of the NAS 1000s followed by a
), followed by
-
http://D4059ABC3433-:3201
5.
. Press Enter. This launches
:3201
Table 4, fill in the screens that
NAS 1000s Quick Start Guide
Figure 4.