Table of Contents
Advertisement
Remote monitor
This function works only if the function is set and turned on by
writing-frequency software.
Initiate remote monitor
User menu function：
1. Press [MENU] key to enter the menu mode
2. Press [
]/[
] key to contact list, then press [MENU] key to select
3. Press [
]/[
] key to the desired user alias or ID, then press
[MENU] key to select.
Or press [
]/[
] key to manually dial, then press [MENU] key to
select, flashing cursor appears, input the user ID you want to call, then
press [MENU] key.
4. Press [
]/[
] key to "Remote monitor" , the screen displays the
remote monitor <User alias or ID>, and then press the [MENU] key to
indicate that the call has been sent.
5. When the walkie talkie send remote monitor, the LED indicator light is
red.
6. "Remote moni success" displays if it is successful, and "Remote
moni fail" displays if fails.
Receive remote monitor
After receiving the remote monitor command, it automatically starts
transmitting voice and surrounding environment background sound, and
exits automatically when the transmission time is up.
Radio activation and remote kill
47
You can activate or remote kill any walkie-talkie in the system.For
example, you might want to disable a stolen walkie-talkie, prevent the
thief from using it, and enable it when recovered.
Set activation and remote kill
In frequency software, the following operations are performed:
1.Edit -> DTMF-> signaling -> decode -> response type, select activation
and remote kill;
2.DTMF number -> Enter the number;
3.Select the corresponding receiving signaling system (the same system
as step 2) within the channel information and check decoding X (the
same number as that required in step 2).
4.When the corresponding DTMF number is received, the corresponding
ctivation and remote kill function will be realized.
Radio activation
In digital mode, you can send an activation command to a contact to
resume normal use of the two-way radio.
Initiate radio activation
User menu function：
1. Press [
]/[
] key to enter the menu mode
2. Press [
]/[
] key to contact list, then press [MENU] key to select
3. Press [
]/[
] key to the desired user alias or ID, then press
[MENU] key to select.
Or press [
]/[
] key to manually dial, then press [MENU] key to
select, flashing cursor appears, input the user ID you want to call, then
48
Hide quick links:
Advertisement
Table of Contents
