Table of Contents
Advertisement
5.Press [
]/ [
] tto "TOT" , then press [MENU] to select.
6.The screen shows infinity, 15S, 30S... 555S option (additive increase in
the range of 15S), press [
]/ [
press [MENU] to select, if you select to infinity, then the screen display
turn off the time-out timer, if you select others, the screen display xxS
has been selected.
Note: In the emergency alarm mode, this function is invalid.
VOX
This function allows you to initiate voice activation for hands-free calls on
programmed channels. Regardless of when the microphone on the
attachment with VOX function detects the voice, the radio will
automatically transmit the signal during the programmed time period.
Press the[PTT]during the radio operation will disable the VOX function, to
re-enable the VOX function need perform one of the following
operations:
• Close and re-open the radio;
• Change channel through channel knob;
• Perform the following procedure:
Enabling or disabling this function that is limited to radio of activating
these functions. The voice sensitivity of VOX is set in the radio
configuration.
To turn on or off this function by pre-programmed VOX open/close key.
The menu functions as follows:
1.Press[MENU] to enter menu mode.
2.Press [
]/ [
] to set, then press[MENU]to select.
3.Press [
]/ [
] to the radio setting, then press[MENU] to select.
77
] tto the corresponding option, then
4.Press [
]/ [
] to the VOX, then press [MENU] to select.
5.The screen displays open, press [MENU] to enable the VOX function.
• Or the screen shows off and press [MENU] to turn off the VOX function.
Double wait
The menu functions as follows:
1. Press [MENU] to enter menu mode.
2. Press [
]/ [
] to set, then press [MENU] to select.
3. Press [
]/ [
] to the radio set, then press [MENU] to select.
4. Press [
]/ [
] to the Double wait, then press [MENU] to select.
5. The screen displays "Off /Double Wait/Single Wait" . then press
[MENU] to select.
6. Press [MENU] to confirm and return to the previous menu.
Encrypt
In digtal mode, Turn on encryption function, and the two sides must pair
the key to make the call normally.
The menu functions as follows:
1. Press [MENU] to enter menu mode.
2. Press [
]/ [
] to set, then press [MENU] to select.
3. Press [
]/ [
] to the radio setting, then press [MENU] to select.
4. Press [
]/ [
] to the Encrypt, then press [MENU] to select.
5. Press [
]/ [
] to the select encrypt Off or On, then press [MENU]
to confirm and return to the previous menu.
Power Save
78
Hide quick links:
Advertisement
Table of Contents
