Monitor; Keypad Lock; Frequency Reversal; Tx Repeaters Tone - Baofeng BF-17H Series User Manual

• Press to automatically search a radio station.
(3) Press [SK2] key to exit FM radio.
Note: while you are listening to the radio, the frequency or channel of A / B receiving signal will automatically switch to
the frequency or channel mode for normal transmitting and receiving.
When the signal disappears the radio will automatically switch again to FM radio mode.

5.12 Monitor

In standby, press and hold the [SK2] key to enter Monitor. When receiving matched carrier but the signaling or the signal is
too weak, this function allows monitor the weak signal.
Stop pressing the [SK2] key to turn off the speakers and return to standby mode.
» If no signal, it will emit noise when press the [SK2] Key.

5.13 Keypad lock

The radio features a keypad lock that locks out all keys except for the three side keys.
To enable or disable the keypad lock, press and hold the key for about two seconds.
You can also enable so that the radio automatically locks the keypad after ten seconds from the menu.

5.14 Frequency reversal

A short momentary press of the key enables the reverse function
If you for some reason want to listen to the repeater's input frequency instead, press key momentarily and you'll
reverse your transmit and receive frequencies.

5.15 TX Repeaters tone

Press [PTT] + key to send 1750Hz repeaters tone. This function is useful for communications through repeaters.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to
unlock your radio.
19