Table of Contents
Advertisement
2.Press the [MENU] button to enter into the MENU mode;
3.Press the [
]/ [
] button to scan, then press the [MENU] button to
select;
4. If the scan was stopped, the screen will indicate to open, or if the scan
is activated, the screen will indicate to close.
5.Use the [MENU] button to select.
6. When the scan is activated, the red LED indicator light flash, and the
scan icon will appear in the screen;
Or when the scan is stopped, the LED light will be off and no scan icon is
displayed.
Scan Reply
During scan, the radio will stop at the channel/group calls when the radio
detect activity channel/group calls,
This is called as the pre-programmed time limit for the "Scan suspend
time"
Progress:
1. Hold the radio in a vertical position and keep it 1-2 inches (2.5-5.0cm)
from your mouth. If the function of "Free channel beep" enabled. you will
hear a short beep sound when release the [PTT] button, this indicates
the channel is free and wait for your reply.
2.Press the [PTT] button during the suspend time. The LED light is red.
3.Release the [PTT] button to receive.
4.If you don' t response during the suspend time, the radio will go on
scanning.
69
Menu setting
Radio setting
You can make the following settings according to your own preferences
and actual needs, so as to maximize their performance.
The setting method: Enter into the menu "Setting ->Radio setting" ,
select the corresponding setting to set. The press [MENU] to enter the
radio Settings.
The setting items are as below list:
Setting
Options
Description of operation
options
and Range
1.Squelch
Strict
Strictly filter the useless calls or background noise
Normal
Normally filter the useless calls or background noise
2.TX Power
Low
Low power transmission
High
High power transmission
3.Talk
On
ON; the function works only when "Allow offline" of current
around
channel of the Software is ticked
Off
OFF
Off
Transmit when the channel is occupied
4.Busy lock
Carry
Press PTT to prohibit transmission when there is carrier
wave
QT/CC
Match sub-audio / color code forbidden
OFF
Off, no transmission limit
Alarm in 10 seconds before transmission, and prohibit
5.Transmit
transmission when the time is up; for example, when it is
time-out
15 ～ 495S
set to 60 seconds, alarm is sent for 10 seconds from
timer （TOT）
the50th second, and transmission is prohibited at the 60th
second
70
Hide quick links:
Advertisement
Table of Contents
