Table of Contents
Advertisement
The scan function helps you to receive the communication activity from
other channels or groups call, further to know the current activity of the
relative team members. The radio can support up to 250 scan lists with a
maximum of 31 members. Every scan list supports the mix of analog and
digital channels. You can add/delete channel or prioritize channel by
editing scan list.
Scan the list
1. Use the [
]/ [
] to choose a channel with pre-programmed scan
list;
2.Press the [MENU] button to enter into the MENU mode;
3.Press the [
]/ [
] button to scan, then press the [MENU] button to
select;
4.Press the [
]/ [
] button to read the list, then press the [MENU]
button to select;
5.Use the [
]/ [
] button to read every member in the list.
If you set the priority, the priority icon will be displayed to the left of
member alias, that means this member is priority 1 channel or priority 2
channels , and if the priority is set as, the icon will not displayed. Several
priority 1 channel or priority 2 channels is not allowed in one scan list.
Or Select to delete a channel in the current scan list, but you cannot
delete the first channel in the scan list.
Add scan channel
1.Press the [MENU] button to enter into the MENU mode.
2.Press the [
]/ [
] button to scan, then press the [MENU] button to
select.
67
3.Press the [
]/ [
] button to add channel, then press the [MENU]
button to select.
4.Press the [
]/ [
] button to choose the required add channel, then
press the [MENU] button to select.
5. The screen indicates "Success to add channel" and back to the upper
menu automatically.
Scan instruction and method
The radio will check if there are any voice activities to the current
channel by pre-program the scan list cycling. The red LED indicator light
flash and the scan icon
will appear in the screen.
During the duplex mode scan period, if you are on a digital channel and
your radio locks an analog channel, the digital mode will be automatically
switched to analog mode during the entire duration call.
There are two ways to scan:
• Manual scan: start to scan by pre-programming the scan turn on/turn
off button or the menu function, when start to scan, the radio will detect
all the channels/group calls pre-set in the scan list.
• Automatically scan: when you choose a channel/group calls which have
been activated, the radio will start to scan from the automatically
scanned channel.
Start and stop scan
Press the pre-programmed scan turn on/turn off button or enter into the
scan menu function
1. Use the channel knob to choose a channel with pre-programmed scan
list;
68
Hide quick links:
Advertisement
Table of Contents
