Trip Computer; Trip Reset - CITROEN C5 AIRCROSS Handbook

With CITROËN Connect Nav
F Press this button to select the
Settings menu.
F Select "OPTIONS".
F Select "Screen configuration".
F Select the "Brightness" tab.
F Adjust the brightness by pressing
the arrows or moving the slider.
F Press this button to save and exit.
You can also switch off the screen:
F Press this button to select the
Settings menu.
F Select "Switch off screen".
The screen goes off completely.
F Press the screen again (anywhere on its
surface) to activate it.

Trip computer

Information displayed about the current journey
(range, fuel consumption, average speed, etc.).
Display of data in the
instrument panel
With instrument panels with dials
The display of trip computer data is selected by
pressing on the end of the wiper control stalk or
by rotating the thumb wheel situated to the left
of the steering wheel.
With digital instrument panel
Trip computer data is displayed permanently
when you select the display mode "DRIVING"
or "PERSONAL", depending on version.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
Display of the different trip computer tabs
F Press this button, located on the end of the
wiper control stalk, to display the different
tabs in turn.
- The current information with:
• the range,
• the current fuel consumption,
• the Stop & Start time counter.
- Trip "1" with:
• the average speed,
• the average fuel consumption,
• the distance travelled,
for the first trip.
- Trip "2" with:
• the average speed,
• the average fuel consumption,
• the distance travelled,
for the second trip.

Trip reset

F When the desired trip is displayed, press
the button on the end of the wiper control
stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
identically.
Instruments
1
31