TRIP COMPUTER
System which provides current infor-
mation concerning the route travelled
(range, consumption...).
Monochrome screen C
Data displays
Press the button, located at the end
of the wiper stalk , to display the
various trip computer tabs in suc-
cession:
INSTRUMENTS and CONTROLS
- the current information
tab with:
● the range,
● the current fuel
consumption,
● the distance remaining
to be travelled,
- the trip "1" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed, for
the fi rst route.
- the trip "2" tab with:
● the distance travelled,
● the average fuel
consumption,
● the average speed, for
the second route.
Pressing the button again returns
you to the normal display.
Route zero reset
When the route required is dis-
played, press the control for more
than two seconds.
Trips "1" and "2" are independent but
their use is identical.
Trip "1" permits, for example, daily calcu-
lations, and trip "2" monthly calculations.
1 1
33