Dyna-Glo Delux KFA650DGD User's Manual And Operating Instructions page 13

NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
G.) FUEL FILTER
CLEAN TWICE PER HEATING SEASON OR AS NEEDED.
Tank Fuel Filter
- Remove fan guard.(See page 11).
- Disconnect fuel line (B) from pump and
pump fuel filter assembly with 3/8" wrench
(See Figure 13)
- Remove two screws that fix bracket-filter
to shell lower and remove bracket-filter.
- Carefully pry fuel filter loose from fuel
tank with flat end of screw driver.
- Wash fuel filter and fuel lines with clean
kerosene.
- Replace fuel filter into fuel tank.
- Replace bracket-filter to shell lower.
- Connect fuel lines (B) to pump and pump
fuel filter assembly.
- Reinstall fan guard.
Pump Fuel Filter
- Remove fan guard.(See page 11)
- Unscrew (C.W) filter bottom from
filter top
with adjustable pliers.
- Remove fuel filter, gasket, magnet
from filter
bottom.(See Figure 14)
- Wash filter bottom with clean
kerosene.
- Wipe inside of filter bottom dry with
clean cloth.
- Wash Fuel filter in clean kerosene.
- Remove dirt attached magnet.
- Put clean magnet, fuel filter and gasket
back in filter bottom.
- Tighten firmly.
PUMP FUEL FILTER ASSEMBLY
FUEL FILTER
Figure 13. Remove Tank Fuel Filter
Figure 14. Fuel Pump Filter
12
PUMP
SCREW
SHELL LOWER
BRACKET-FILTER
FUEL LINE(B)
FILTER TOP
GASKET
FUEL FILTER
MAGNET
FILTER BOTTOM