When Using Api-Aio(98/Pc) - Contec AI-1604CI2-PCI User Manual

When Using API-AIO(98/PC)

(1) The "Found New Hardware Wizard" will be started.
Select "Install from a list or specific location[Advanced]", then click on the [Next] button.
If you are using Windows NT 4.0, the "Found New Hardware Wizard" is not started.
Go to Step 4 "Initializing the Software".
(2) Specify that folder on the CD-ROM which contains the setup information (INF) file to register the
board.
CAUTION
Note that the displayed board name is "ADI16-4C(PCI)" even though you have installed this board.
There is no problem in operation even if the board name is displayed as "ADI16-4C(PCI)".
AI-1604CI2-PCI
* The name of the board
you have just added is
displayed.
- ADI16-4C(PCI)
2. Setup
21