Ricoh Pro C7200 Operating Instructions Manual page 16

2. Installing the Printer Driver
Port Type
Standard TCP/IP port
IPP port
LPR port
WSD port
Using the Standard TCP/IP port
1. Click [PCL Printer Driver] or [PostScript 3 Printer Driver] on the installer screen.
2. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next >].
3. Select a printer driver you want to use, and then click [Next >].
4. Select [Specify a new port], and then click [Next >].
5. Select [Standard TCP/IP Port], and then click [Next >].
6. Click [Next].
7. Enter the machine name or IP address, and then click [Next].
When the device type selection appears, select "RICOH Network Printer C model".
8. Click [Finish].
9. Select the [Printer Name:] check box of the machine model you want to use.
10. Configure the user code, default printer, and shared printer as necessary.
11. Click [Continue].
The installation starts.
12. Click [Finish].
Using the IPP port
• Installation of the certificate is especially necessary for users who want to print via IPP-SSL from
Windows 7/8.1/10 or Windows Server 2008/2008 R2/2012/2012 R2/2016. For details,
consult your administrator.
• If a certificate authority issues a certificate that must be authenticated by an intermediate certificate
authority, and the certificate is installed on this machine, an intermediate certificate must be
14
Printer Driver Type
page 14 "Using the Standard TCP/IP port"
page 14 "Using the IPP port"
page 16 "Using the LPR port"
page 16 "Using the WSD port"
Reference