Installing Batteries; Applying The Cuff - HoMedics HEALTH PLUS BPS-FD1 Manual

BPS-FD1.qxd 7/13/06 9:55 AM

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover
towards you to open the battery compartment.
2. Install or replace 4 "AA" sized batteries in the
battery compartment according to the indications
inside the compartment.
3. Replace the battery cover by clicking in the
bottom hooks first, then push in the top end
of the battery door.
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
Replace the batteries in pairs. Remove batteries when
unit is not in use for extended periods of time.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
Page 9
9

APPLYING THE CUFF

Please see the illustration below for a description of
the arm cuff.
Índex
Adult Cuff
9.5"~14.2"
24 ~ 36 cm
Patented
Latex free
CF00X04030
Tube
Artery Mark
OK OK
OK Range Indicator
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-Ring in order to form a loop. The smooth side,
without felt material, should be on the inside of the
cuff loop.
End of cuff
D-ring
10
Artery Symbol ( )
Select Large Adult Cuff
Felt Material
on the outside
of cuff