(5) Select [Internet Protocol Version 4 (TCP/IPv4)] and click on [Properties].
(6) Fill the IP fields as shown below.
(7) Click on [OK] to confirm and close two windows on Step 6 and 5.
Note:
It takes up to 20 seconds for the new IP to be recognized. A popup window on the bottom right corner should show when
the IP is correctly set. Turn OFF any Firewall that could prevent data from being exchanged between the Axis camera and
the PC. You may also have to restart your computer.
IP address: 172.31.3.50
Subnet mask: 255.255.0.0
4