Advertisement
(10) After the IP address is changed, restart the video server (power OFF/ON).
5.2. Configuring Axis Video Server
Axis video servers need to be configured using a Web browser like IP cameras.
(1) Enter the IP address of the video server. In this example, [http://172.31.200.7] is entered.
(2) The camera configuration page will open. Click on [Setup] to access the configuration page.
(3) You will be asked for an ID and password. Enter the following ID and password and click on [OK].
Note:
When the webpage loads, pay attention to the top of the page to authorize the installation of the ActiveX. Click on the
yellow bar and choose [Install ActiveX].
(ActiveX is a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.)
ID
: "root"
Password : "pass"
12
Advertisement
