Advertisement
6.2. Checking Axis Video Server(s) in Menu
(1) After the interconnection and setup of video servers finish, check that they are detected in the TZT9/14/BB and
TZTL12F/15F network, accessing [Menu]/[Settings] – [Camera] – [Axis Quad Server] and [Second Axis Quad
Server].
Detected
At default, [Server] is set to [OFF]: Turn it [ON] to show
detailed settings. When the video server is detected, the
"
" symbol appears. You can turn ON/OFF the [Quad
Mode] and [Input 1] to [Input 4] according to your
preference. In this example, everything is [ON].
(2) Available video server sources are displayed in the RotoKey ™ menu.
In this example, [Quad Mode] and [Input 1] to [Input 4] are set to
[ON] in menu, thus showing all the selections.
Disconnected or Not Detected
When the video server is disconnected or not detected, the
" " symbol appears.
15
Advertisement
