Advertisement
5. Setting up Axis Video Server
5.1. Setting up IP Address of Axis Video Server
To work in the NavNet TZtouch/2 system, the Axis video servers need to be set up with specific IP Addresses. Up to two
(2) video servers can be connected on a network.
In this example, the Axis M7014 is used.
Follow the Step 1 to 4 in Section 4-1.
(5) Double-click on [AXIS IP Utility] to open the program.
The following window will open, showing the detected cameras in the network.
(6) To change the IP address, select a camera and click on "assign new IP address to selected device" button.
(7) Enter the correct IP address and click on [Assign]. In this example, [172.31.200.7] will be assigned.
It will take a while before the process is finished.
(8) Check that the IP address is changed.
(9) Repeat the process with the other video server if available.
Axis Video Server No. 1
172.031.200.007
Axis Video Server No. 2
172.031.200.008
11
Advertisement
