Copper Ethernet Ports; Sfp Transceivers - Siemens RUGGEDCOM RS950G Installation Manual

Chapter 4
Communication Ports
Section 4.1

Copper Ethernet Ports

The RUGGEDCOM RS950G supports several 100Base-TX or 1000Base-TX Ethernet ports with RJ-45 connectors.
The RJ-45 connectors are directly connected to the chassis ground on the device and can accept CAT-5 shielded
twisted-pair (STP) cables.
The following is the pin-out description for the RJ-45 connectors:
8
Figure 12: RJ-45 Ethernet Port Pin Configuration
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 4.2

SFP Transceivers

The RUGGEDCOM RS950G features three Small Form-Factor Pluggable (SFP) transceiver sockets, which are
compatible with a wide array of SFP transceivers available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
18
Pin
1
1
2
3
4
5
6
7
8
Name
100Base-TX 1000Base-TX
RX+ BI_DA+
RX- BI_DA-
TX+ BI_DB+
Reserved (Do BI_DC+
Not Connect)
Reserved (Do BI_DC-
Not Connect)
TX- BI_DB-
Reserved (Do BI_DD+
Not Connect)
Reserved (Do BI_DD-
Not Connect)
Section 5.4, "Copper Ethernet Port
RUGGEDCOM RS950G
Installation Guide
Description
Receive Data+
or Bi-Directional
Pair A+
Receive
Data- or Bi-
Directional Pair A-
Transmit Data+
or Bi-Directional
Pair B+
Transmit Data+
or Bi-Directional
Pair C+
Receive
Data- or Bi-
Directional Pair C-
Transmit
Data- or Bi-
Directional Pair B-
Receive Data-
or Bi-Directional
Pair D+
Receive
Data- or Bi-
Directional Pair D-
Copper Ethernet Ports