Mounting Installation For Manufactured; (Mobile) Homes; Gas Piping & Connections - Bosch 940 ES Installation And Operating Instructions Manual

Installation instructions
Fig. 29 Mounting the heater
CAUTION:
Personal injury and property damage.
▶ Appliance must be installed vertically.
4.8

Mounting installation for manufactured

(mobile) homes

When installing this appliance in a mobile home the unit must
be additionally secured at the bottom of the water heater as
shown in fig. 30. Use the included screws to secure the
brackets at the bottom of the water heater to the wall. If the wall
is sheathed with plaster or drywall, it is recommended that a
support board be first attached across a pair of studs at the
bottom of the unit as shown in fig. 27.
36
6720608158-05. 1 AL 6720608158-05. 1 AL
Fig. 30 Mounting the heater in manufactured (mobile)
homes
4.9 Gas piping & connections
Before connecting the gas supply, check the rating plate on the
right side of the heater to be sure that the heater is rated for the
same gas to which it will be connected.
In the United States: The installation must conform with local
codes or, in the absence of local codes, the National Fuel Gas
Code ANSI Z223.1/NFPA 54.
In Canada: The Installation must conform to CGA B149
INSTALLATION CODES and/or local installation codes.
DANGER:
Explosion hazard!
▶ DO NOT connect to an unregulated or high pressure
propane line or to a high pressure commercial natural gas
line.
940 ES – 6 720 644 930 (2019/09)