Thermoscreens T Series Operation And Maintenance page 7

CEILING LEVEL
Step 3 If you are installing model T1500R, fit a 5
of the unit. For model T2000R, fit 5
Step 4 Secure each rod to a suitable structure that can support the weight of the unit (see section 3:
Specifications for weights).
Step 5 Adjust the height of the unit on its hanging rods so the bottom surface of the casing goes
between 25-50mm up into the ceiling as shown in Fig 4. Ensure the unit is level.
WARNING: It is the sole responsibility of the installer to ensure that the fixing locations and
suspension system used are suitable for the air curtain being installed.
7.3 Attaching the recessed grille to the air curtain
The recessed grille consists of:

Metal frame

Hinged standard or wider width inlet/discharge grille

Slotted fixing brackets
There are 4 fixing slotted brackets on the T1000R with 6 brackets fitted on T1500R and T2000R (see
Fig 5a and Fig 5b).
Centre brackets
for 1.5m and 2m
Fig 5a; standard width grille
T9901012-1-1 UK (v9)
M10 hanging rods
RECESSED AIR CURTAIN
Bottom surface of recessed
air curtain casing
th
M10 threaded rod into the hanging point in the middle
th th
and 6 threaded rods, see Appendices 1 and Fig 4.
Less angled
bracket
Fig 5b; wider width grille
CEILING LEVEL
Fig 4
Centre brackets
for 1.5m and 2m
More angled bracket
Page | 7