Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Emtec F200
Summary of Contents for Emtec F200
- Page 1 F200 Set-top-box streamer Quick Start Guide F200 User Guide...
-
Page 2: Table Of Contents
INTRODUCTION ..............................3 The F200 unit ..............................3 Set up for Windows XP, Vista, 7 and Mac ......................3 CONNECT THE F200 TO YOUR SET-TOP-BOX (STB) .................... 3 Connect the F200 to the network ........................4 Connect the power adapter ..........................4 Install and run the F200 player ........................... -
Page 3: Introduction
INTRODUCTION Congratulations on buying the F200! We will take you through a few simple steps to get you up and running. The F200 is a sleek and stylish consumer device that connects to your television STB (Set Top Box), and enables a complete television and Internet media experience on your Android Smartphone or Tablet, iPhone, iPad, BlackBerry, PC, Mac. -
Page 4: Connect The F200 To The Network
Write down your STB brand and model number. You will need it later for the Setup. CONNECT THE F200 TO THE NETWORK You can use either a wired LAN or Wi-Fi connection to attach the F200 to your home network. But for the first setup process use the wired connection. -
Page 5: Set Up Wireless Settings
When you see this dialog box, click Finish. The F200 Setup Wizard will automatically search for the F200 connected to your network. SET UP WIRELESS SETTINGS In the “Set up the wireless settings” window: 1. Select the name of your wireless network in the Select your home network field 2. -
Page 6: Video Input Configuration
The specified wireless settings will be applied to your F200. Note: If you wish to use your F200 on a wired network, please make sure it is connected to your router using Ethernet cable and press “Skip”. Your F200 has been connected to your wireless network, it will no longer be necessary to have your F200 connected directly to your router. -
Page 7: Set Up The Epg (Electronic Program Guide)
2. Click Next SELECT A SET-TOP-BOX Note: the IR blaster cable has to be connected first on the F200 and fixed close the infrared receiver of your STB to transmit remote control signal. Please refer to the connexion guide Step 3. -
Page 8: Assign A Name And Password
If the Set Top Box does not work properly, click Back and choose a different model. ASSIGN A NAME AND PASSWORD 1. Enter a name for your F200 in the Name field 2. Enter a password in the Password and Confirm password fields 3. - Page 9 The system will check the configuration. When this dialog box is displayed, you have successfully set up your F200! 4. Click Finish F200 User Guide...
-
Page 10: Download And Install Players
Install the PC Player on your PC from the CD-Rom supplied • Run the Player • Select Run the Player if you have already set up the F200 • Go to Player > Add or Select Vulkano > Add •... -
Page 11: Troubleshooting
FREQUENTLY ASKED QUESTIONS Q: I have forgotten my F200 Password. Is there any way to retrieve it? A: You can retrieve the User Name and Password of your F200 from the PlayerSettings.xml file of your laptop by following these steps:... - Page 12 A: The F200 uses TCP 49177 and TCP + UDP 56123 for Remote access. It can usually configure your router automatically if the UPnP of your router is enabled. If not, or if your router doesn’t not support UPnP, a manual port forwarding may be required.
- Page 13 DHCP allocation range set by the router or used by another device using static IP on the same LAN. If the F200 is being used on a router that does NOT support UPnP, and as a result port forwarding had to be set manually using the router’s web interface, then a static IP assignment for the F200 is recommended.