Table of Contents
Advertisement
2. With the tractor coversopen, mount the paper fmm the bottom of the
printer,by aligningholes with the pins on the tractorunit.
1
F/gum47. Mount t hefanfold peperfromthebotlwnof theprinter.
3.
4.
Adjustthespacingofthetractorunitsby slidingthemalongthebar,using
the clamp lever at the back of each unit to release and lock them in
position.Whenthe leveris up, the unitis released,andwhenit is down,
the unitis locked.
Nowclosethet.mctorcoven,againmakingsurethatthepaperholesare
alignedwiththepinsonthetractorunits.Iftheym notalignedproperly,
you willhaveproblemswithpaperfeeding,possiblyresultingin tearing
andjammingof the paper.
Loadingthepaper with Push/Pullfeed
YoucanloadthefanfoldpaperwithPush/PuU feedbyusingboththeinternal
push tractorunit and the optionalPullTractorUnit.
1. Placeastackoffanfoldpaperbehindandatleastonepage-length below
the printer.
2. Turn the pnnter'spewer OFF.
3. Pushthereleaseleverbackward.ThishastheeffectofreleaSing thepaper
from the platenroller,andengagingthe tractorfeed.
.
31
Advertisement
Table of Contents
