Chapter4 Paperinstallation And Use; Selection Ofpaper - Star Multi-Font ZA-200 User Manual

I
chapter4
PAPERINSTALLATION AND USE
Thischapterdescribesinstructions forprintingsuchasselectingpapertypes,
adjustingthe printinggap, and installingpaper.
SELECTIONOF PAPER
Yourprinteracceptsany of the followingpapem:
Singlesheets(cut forms)and stationery
Use the ftictionfeed or the optionalAutomaticSheetFeeder.
Fanfoldforms
Fanfold forms have holes alongthe sides and perforationsbetweenthe
sheets.They = also calledsprocketforms,punchedforms,orjust plain
"computerpaper".
Printing on or near the perforationsof continuousfanfold forms may
reduceprintingquality,misalignthefanfoldforms,or causea paperjam.
It is nxommendednotto printwithinan amaof oneinchbeforeand after
the perforations.
c
Multi-partforms
You canuse multi-partforms that have up to five pats includingthe
originalwhen the Multi-partmode is selectedwith the MemorySwitch
setting.(For details,pleaserefer to Chapter6.)
Use pmssumsensitivemulti-partformswithboth sideedgesgluedand a
differencein thicknessof 0.05mmor less betweenthe side edges. It is
recommendedto use the bottomfeed with the optionalPull TractorUnit
to get fine alignment.
NOTE: Cmeshouldbetakenincolorprintingwithcontinuousmulti-part
forms. Sideedgesof papermightbe damaged.
F3tprintedforms
25