Star Micronics Multi-Font NX-2415 User Manual page 75

Select graphics mode
Mode ASCII
Decimal
Hexadecimal
Both
cESC> "*" FIO nl
27 42
n0 nl
1B 2A n0
nl
n2 ml m2 . . .
n2 ml m2 . . . n2 ml m2 . . .
Selects one of eleven graphics modes depending on the value of nO
and prints dot graphics in this mode. See <ESC, "K" (for 8-bit
graphics) or <FS> '7 (for 24-bit graphics) for information on nl,
n2, ml, m2, . . .
n0 Graphics mode
0 8-bit Normal-density
( 60 dots per inch)
1 8-bit Double-density
( 120 dots per inch)
2 8-bit Double-density, double-speed
3 8-bit Quadruple-density
(240 dots per inch)
4 8-bit CRT graphics, mode I
( 80 dots per inch)
6 8-bit CRT graphics, mode II ( 90 dots per inch)
32 24-bit Normal-density
( 60 dots per inch)
33 24-bit Double-density
( 120 dots per inch)
38 24-bit CRT graphics
( 90 dots per inch)
39 24-bit Triple-density
( 180 dots per inch)
40 24-bit Hex-density
(360 dots per inch)