Star Micronics Multi-Font NX-2415 User Manual page 64

Perform one n/l 80-inch or n/216-inch line feed
Mode ASCII
Decimal Hexadecimal
Both <ES6
"I-' n
27 74 n 1B 4A n
Feeds the paper once by n/l 80 inches (standard mode) or n/216
inches, where n is between 1 and 255. Does not move the print
position right or left when DIP switch l-2 is OFF. Does not change
the line-spacing setting.
Perform one n/216=inch reverse line feed
Mode ASCII
Decimal Hexadecimal - .-~
Std.
cESC> "j" n
27 106 n 1B 6A n
Feeds the paper once by n/2 16 inches in the reverse direction, where
n
is between 1 and 255. Does not move the print position right or left
when DIP switch l-2 is OFF. Does not change the line-spacing
setting.
Feed paper n lines
Mode ASCII
Decimal Hexadecimal
Both
<ESC> "f' "1" n
27 102 49 n 1B 66 31 n
<ESC> "f' <l> n
27 102 1
n
1B 66 01 n
Feeds the paper
n
lines from the current line, where
n
is between 0
and 127.
-
Set top of page at current position
-
Mode ASCII
Decimal Hexadecimal -
-
IBM cESC> "4"
27 52 1B 34
Sets the current position as the top-of-page position. Note that this
can also be done from the control panel.
56
-