Star Micronics Multi-Font NX-2415 User Manual page 74

Print g-bit double-density, double-speed graphics
Mode ASCII Decimal Hexadecimal
Both
cESC> "I"' nl n2
27 09
nl
n2 1B 59
nl n2
ml m2 . . . ml m2 . . . ml m2 . . .
Prints bit-image graphics at 120 dots per inch horizontally (maxi-
mum 1632 dots wide), skipping every second dot in the horizontal
direction. See <ES0 "K" for other information.
Print g-bit quadruple-density graphics
Mode ASCII Decimal Hexadecimal
--
Both
cESC> 7" nl n2
27
90 nl n2
IB 54
nl ni?
ml m2 . . . ml m2 .,. ml m2
Prints bit-image graphics at 240 dots per inch horizontally (maxi-
mum 3264 dots wide), skipping every second dot in the horizontal
direction. See <ES0 "K" for other information.
Print 24-bit hex-density graphics
Mode ASCII Decimal
Hexadecimal
Both
cFS>
"Z" nl n2
27
90 nl n2
1C 5A
nl n2
ml m2 rd . . .
ml m2 m3 . . .
ml m2 m3 ..,
Prints 24-bit dot graphics at 360 dots per inch horizontally. The
graphic image is 24 dots high and nl + n2 x 256 dots wide.
Maximum width is 13.6 inches (4896 dots). In the data ml, m2, m3
. . . each three bytes represent 24 vertical dots. In the leftmost
position, the most significant bit of ml is the top dot; the least
significant bit of ml is the eighth dot from the top; the most
significant bit of m2 is the ninth dot; the least significant bit of m2
is the sixteenth dot from the top; the most significant bit of m3 is the
seventeenth dot from the top; the least significant bit of m3 is the
bottom dot. The rest of the data is similar. The number of data bytes
must be 3 x (nl + n2 x 256). Dots beyond the right margin are
ignored. At the end of dot graphics printing the printer returns
automatically to character mode.
-
66
-