Star Micronics Multi-Font NX-2415 User Manual page 58

Select double or quadruple size
Mode
ASCII
Decimal Hexadecimal
Both <ESC> "h" n
27 104
n
1B 88
n
Selects the size of subsequent characters as shown below. Extra-
high characters align along the cap-line of normal characters, with
the base line temporarily moving down. Line spacing is temporarily
doubled when n = 1 and quadrupled when n = 2.
n Effect
0 Normal size
1 Double-high, double-wide
2 Quadruple-high, quadruple-wide
Select character size
Mode ASCII
Decimal
Hexadecimal
Both "(6' .,(,' 6'S" 6,j.t Uj.9 n
40 40 83 41 41
n 28 28 53 29 29 n
Selects a combination of character height and width according to the
value of n, as below. Does not move the base line.
n Character width
Character height
0 Single width
Single height
1 Double width
Single height
2 Single width
Double height
3 Double width
Double height
Print double-height characters
Mode
ASCII
Decimal Hexadecimal -
Both
&SC> 'lwIl "1"
27 119 49 1B
77 31
<ESC> "w" cl>
27 119
1 1B 77 01
std. cFS> "V" "1"
28 86 49 1c
56 31
.
cFS>
"V" <l>
28 86
1 1c 58 01
Prints subsequent characters at double height without moving the
base line, and without changing the line spacing.