Star Micronics Multi-Font NX-2415 User Manual page 52

Select character set #2
Mode ASCII
Decimal Hexadecimal
Both
<ES& "6" 27 54
1B 36
Selects character set #2.
Select international character set
-
Mode ASCII
Decimal Hexadecimal
Std.
<ES& "R" n
27 82
n
1B 52
n
IBM cFS> "R" n
28 82
n
1C 52
n
-, -
Selects an international character set according to the value of n.
II Character set
0 U.S.A
1 France
2 Germany
3 England
4 Denmark1
5 Sweden
6 Italy
n Character set
7 Spain I
8 Japan
9 Norway
10 Denmark II
11 Spain II
12 Latin America
13 Denmark/Norway
The first eight of these character sets (from U.S.A. to Spain I) can
be selected as power-up defaults by DIP switches 2-2 to 24.
Enable printing of all character codes
Mode ASCII
Decimal Hexadecimal
IBM cESC> 'f' nl n2
27 92 nl n2
1B 5C
nl
n2
1
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered
control codes. This command remains in effect for the next nl + n2
x 256 characters, where nl and n2 are numbers between 0 and 255.
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
__
44