Care And Maintenance - Britax B-SAFE 35 User Manual

BRITAX Child Safety, Inc.
Incompatible Vehicle Seat Belts
Vehicle seats and seat belts differ from vehicle to vehicle�
Refer to your vehicle owner's manual for specific information
about your vehicle seat belts and their use with child seats�
The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types
listed below are in the chosen seating position, choose
another vehicle seating position or check your vehicle
owner's manual for information on installing a car seat in
your vehicle.
Lap belts with a sewn-in
latch plate that have a
retractor that locks only
in case of a sudden stop.
Lap-shoulder belts with
top or bottom anchor
points on the vehicle door.
NOTE: This BRITAX car seat may not be compatible with
every inflatable lap-shoulder belt. See FAQs in the support
section of the BRITAX website (us.britax.com/faqs) for
additonal instructions.
38
Lap belts forward of
the vehicle seat bight.
Motorized, automatic
vehicle seat belts.

Care and Maintenance

Removing the Cover
1. Remove the canopy.
a. Unhook the elastic,
and push the button.
b. Lift up the canopy
from both sides.
2. From the back of the infant
car seat remove both
harness straps from the
harness yoke.
3. From the front of the
infant car seat pull both
harness straps out of the
shell, cover and head pad.
Remove head pad and
comfort pads.
4. Unbuckle the harness and
chest clip then remove the
belly pad and buckle. See
page 32.
B-SAFE 35 User Guide
39