Handle Position - Britax B-SAFE 35 User Manual

BRITAX Child Safety, Inc.
IMPORTANT:
If your child eats and drinks while in the
child seat, you will need to check the buckle periodically
and rinse out any accumulated debris (see page 44)�
1. Unbuckle the harness by
pressing the red button in
the center of the buckle
and sliding both harness
tongues out of the buckle.
2. Locate the buckle strap
retainer on the bottom of
the infant car seat and
pull away from the seat to
loosen.
3. Turn the buckle strap
retainer so that the short
side will go through the
slot in the infant car seat
shell and cover.
4. Pull the buckle and belly
pad out of the slots in the
shell and cover.
32
5. Push the retainer through
the slot in the cover and
shell for the appropriate
buckle position.
6. Pull up on the buckle to
ensure that the buckle
strap retainer is properly
seated.

Handle Position

The car seat handle must be
adjusted to one of the four
locked positions for use in a
vehicle.
Always use position 1 to carry
the car seat.
To adjust, press and hold both
handle adjuster levers and
rotate the handle to the chosen
position.
B-SAFE 35 User Guide
1 Carry
2
Position
3
4
33