Fiat 500 Blue&me Manual page 60

Problem
Display screen shows:
PAIR. FAILED
Display screen shows:
PRIVATE NUMBER
The system does not download
the phonebook automatically
after connecting the mobile phone
to Blue&Me™
Probable Cause
Ì The user has not entered the PIN
code provided by the system into
their mobile phone within three
minutes
Ì The caller is not recognised
as a name stored in the phonebook,
and the paired mobile phone does
not have a caller ID feature
Ì The caller has blocked caller ID to
prevent the display of their name
and/or phone number
Ì The maximum number of failed
phonebook downloading attempts
has been exceeded
Ì The Blue&Me™ syncML profile
configuration on the mobile phone
is not present or not correct
Possible Solution
Repeat the pairing procedure. During
the PIN insertion step, verify that the
PIN you are entering on the mobile
phone is the same number that is shown
on the control panel multifunctional
display
SETTINGS FUNCTIONS – PAIRING
YOUR MOBILE PHONE
Enter a contact in your mobile
phonebook for the incoming call, and
then download the phonebook/contact
again
In this case, nothing can be done
and the message will always appear
Check whether your mobile
phone is supported in the
Blue&Me™/Compatibility/
Supported phone list section
on the www.fiat.com web site
Or, configure syncML on your mobile
phone following the corresponding
instructions and setting it according
too the suggestions shown on the
above web site
Delete users using the settings
Or manually download the phonebook
(see SETTINGS FUNCTIONS
paragraph)
59