Fiat 500 Blue&me Manual page 40

It is important to wait until this con-
firmation message is displayed since
&
ß
pressing /MAIN or /ESC be-
forehand may cancel the pairing
process. If pairing fails, an error mes-
sage will be displayed and the pairing
procedure will have to be repeated.
At the first pairing, the system will
say "Welcome" immediately after
connecting. This message will no
longer be heard for subsequent con-
nection procedures for the same
phone.
The system will ask whether you
would like to copy the phonebook
for the phone that you have just
paired. Copying the phonebook on-
to the system is recommended. To
copy the phonebook, say "Yes". To
not copy the phonebook, say "No".
For certain mobile phones the
phonebook is not copied automat-
ically; in this case you must trans-
fer the contacts using your mobile
phone keypad (see the "Adding con-
tacts" paragraph).
Tips
To improve the voice recognition of your
phonebook entries and Blue&Me™ pro-
nunciation accuracy, try to enter contacts
and store them using the following criteria:
Ì Avoid abbreviations.
Ì Write foreign names according to the
way in which they are pronounced ac-
cording to the rules of the Blue&Me™
language set on your car. For example,
enter "Tanja" as "Tanya", to improve
recognition accuracy and also to obtain
the correct pronunciation by the system.
Ì When adding or editing contact entries,
insert the appropriate accent marks
when the name requires these marks
to be properly pronounced and recog-
nised by the system. For example, write
"Nicolo Rebora" as "Nicolò Rébora"
to obtain the correct pronunciation.
Ì When adding or editing contacts, bear
in mind that certain isolated capital let-
ters may be read as Roman numerals
(e.g. V can be read as fifth).
Ì When calling contacts using voice
recognition, do not include abbreviat-
ed names or the middle initials of your
contacts.
Notes
Ì You are only required to pair your mo-
bile phone a single time.
Ì You can pair up to five mobile phones,
to be used one at a time.
Ì To connect a previously paired phone
to Blue&Me™ you must activate the
®
Bluetooth setting on the phone to be
connected.
Ì Before you transfer the names from
your mobile phone to the hands-free
system, make sure the name of each
person is unique and clearly recognis-
able, so that the voice recognition sys-
tem functions properly.
Ì The system will download only valid
contact entries, i.e. those with a name
and at least one telephone number.
39