Fiat 500 Blue&me Manual page 17

Using voice recognition
The voice recognition system may occa-
sionally fail to recognise a voice command.
To ensure that your voice commands are
always recognised by the system, use the
following guidelines:
'
Ì After pressing
, give the voice com-
mand after the system provides the au-
dible signal that indicates that voice
recognition is active.
Ì After the system has asked you a ques-
tion, wait a second before giving the an-
swer, in order to be sure that voice
recognition is active.
Ì If you want to give a command without
waiting for the system to finish its an-
nouncement or question, you can press
'
again briefly to interrupt the sys-
tem and give your command.
Ì Speak at a normal volume.
16
Ì Pronounce words clearly, not too
quickly but without interruptions.
Ì If possible, try to minimise noise inside
the car.
Ì Ask the other passengers not to talk
before you give voice commands. This
is to prevent misunderstanding since
the system may recognise other words
(in addition to or different from your
voice command) if several people are
speaking.
Ì If your car has a sun roof, you are ad-
vised to close it before using voice
recognition.
Notes
For countries where a version in the na-
tive language is not available, voice recog-
nition of the different commands and
above all phonebook contacts may be dif-
ficult. You are therefore advised to adopt
a pronunciation/accent that conforms to
the language present on Blue&Me™.
To change the voice recognition language
contact a Fiat Dealership or consult the
dedicated area on www.fiat.com