Table of Contents
Advertisement
6. HOW TO USE THE C SEED 125 SPEAKER
WARNING!
• Clean the speaker before use! Make sure that the speaker, in particular the top cover, is free from obstacles and
dirt. Remove any obstacles and dirt.
• Before you use/extend the speaker, make sure that everybody is at a safe distance from the speaker.
To use the speaker:
1. Download and install the C SEED Speakers app from
the App Store.
2. Open the C SEED Speakers app.
3. Tap the Extend button to rise up the speakers.
4. Control the speakers using:
a. The Input Selection menu for choosing your audio
source (for island setup only).
b. The Master Volume slider to adjust the volume.
c. The Mute button to mute the volume.
7. MAINTENANCE AND INSPECTIONS
CAUTION! Do not use cleaning tissues or chemical substances which might damage the surface.
Task
Check if the speaker, in particular the top cover (1), is free from obstacles,
sand and dirt. Remove any obstacles, sand and dirt.
Check if the speaker rises up correctly.
Check the speaker for visible damage and rust. Reparations must be done by a
qualified and trained person.
Clean the tower and top cover of the speaker with lukewarm water, mild
detergent and a sponge.
Check if residues of vermin are visible near the speaker. If so, take appropriate
measures (e.g. bait, traps or rat fright).
Check if residues of vermin are visible near the speaker. If so, take appropriate
measures (e.g. bait, traps or rat fright).
5. Set up the speakers from the menu, using:
a. The Volume Delta (dB) to adjust the volume of the
individual speakers.
b. The Delay Delta (ms) to adjust to the audio delay.
c. The Maximum Volume (dB) to limit the maximum
volume of the speaker.
d. Adjust the light of the LED strip.
6. Tap the Retract button to stop using and rising down
the speakers.
Frequency
Always before you use the product
Always before you use the product
Always before you use the product
Monthly and if necessary
Monthly and if necessary
Always before you use the product
15
Advertisement
Table of Contents
