C SEED 125 User Instructions page 13

11. Use a crimping tool to connect the speaker end of the cable to the
Phoenix plug. See Appendix III for the pin plan.
12. Use a crimping tool to connect the other end of the cable to the
other Phoenix plug and to a speakOn plug. See Appendix III for
the pin plan.
13. Connect the Phoenix plug to the Phoenix connector (7) on the
speaker.
14. Use a level to level the speaker. Fill up the speaker hole.
15. Remove the eye bolts (8).
16. Place the screw discs by placing a sharp tool in the two holes of
the screw disc and turning clockwise.
17. Clean the speaker. Make sure that the speaker, in particular
the top cover (1), is free from obstacles and dirt. Remove any
obstacles and dirt.
C SEED 125 SPEAKER
1
2
1
2
12