Congratulations on the purchase of your new C SEED 125 speaker. You have acquired a high-quality speaker. This manual is part of this product. The manual is intended for the installer and the user of the C SEED 125 speaker. Please 1.
Page 4
9. Disposal Designation Outdoor Speaker General description The C SEED 125 speaker is an outdoor speaker. The speaker can be 10. Warranty integrated with an existing audio system, or can be set up as a stand- Appendix I Declaration of conformity alone audio system.
Congratulations on the purchase of your new C SEED 125 speaker. You have acquired a high-quality speaker. This manual is part of this product. The manual is intended for the installer and the user of the C SEED 125 speaker. Please familiarise yourself with all the included information before using the product.
C SEED 125 speaker Designation Outdoor Speaker General description The C SEED 125 speaker is an outdoor speaker. The speaker can be integrated with an existing audio system, or can be set up as a stand- alone audio system. Type...
C SEED 125 SPEAKER 2.2 PRODUCT ELEMENTS 1. TOP COVER 2. MAIN SPEAKER 3. LED STRIP 4. LED LOGO 5. FRONT COVER 6. ELEVATION UNIT/SHAFT 7. PHOENIX CONNECTOR 8. EYE BOLT/PLACE FOR SCREW DISC 2.3 VISUAL SIGNALS Signal Meaning LED strip fl ashes Indication that the control box has been started.
3 SAFETY INFORMATION 3.1 IMPORTANT SAFETY WARNINGS WARNING! Read and understand all safety instructions. • Follow all the instructions. This will avoid fi re, explosions, electric shocks or other hazards that may result in damage to property and/or severe or fatal injuries. •...
C SEED 125 SPEAKER • DANGER! Close the speaker when the wind picks up or when stormy weather approaches. • Close the speaker when it is snowing, raining, during sandstorms or thunderstorms. • Do not use the speaker during extreme weather conditions, like sandstorms, rain and thunderstorms.
4. INSTALLATION OF THE SPEAKER WARNING! The speaker must only be installed by a qualified and trained person. 4.1 UNPACKING AND CHECKING THE CONTENTS Before you install the product for the first time, you should check it for damage. If damages have occurred during transport, please inform the transport service provider immediately.
C SEED 125 SPEAKER 4.2 HOW TO INSTALL THE C SEED 125 SPEAKER WARNING! • READ ALL SAFETY INSTRUCTIONS CAREFULLY AND MAKE SURE THAT YOU HAVE UNDERSTOOD THEM BEFORE YOU INSTALL THE PRODUCT. • Only a qualified electrician may carry out the electrical installation. All local regulations must be followed.
Page 12
To install the speaker: 1. Attach the sling to the eye bolts (8). Attach the sling to the lifting gear (crane or fork-lift truck). Place the speaker next to the desired location. 2. Use a screwdriver to mount the Phoenix connector (7) to the shaft (6).
Page 13
C SEED 125 SPEAKER 11. Use a crimping tool to connect the speaker end of the cable to the Phoenix plug. See Appendix III for the pin plan. 12. Use a crimping tool to connect the other end of the cable to the other Phoenix plug and to a speakOn plug.
5.1 CHOOSING YOUR CONFIGURATION (INTEGRATED OR ISLAND CONFIGURATION) The C SEED 125 speaker can be integrated with an existing sound system (integrated setup) or can be used as a stand-alone system (island setup). For the island setup you need a receiver. For the integrated setup, you can connect the control box and the amplifi er to the existing home audio system.
Page 15
1. Make sure you have installed the speaker(s) according 8. Connect the amplifi er to the receiver using an XLR<->cinch cable for each channel separately. to the instructions (see “How to install the C SEED 125 Speaker”). 9. Connect control box to the receiver using a network 2.
6. HOW TO USE THE C SEED 125 SPEAKER WARNING! • Clean the speaker before use! Make sure that the speaker, in particular the top cover, is free from obstacles and dirt. Remove any obstacles and dirt. • Before you use/extend the speaker, make sure that everybody is at a safe distance from the speaker.
Page 17
Error Cause Solution No LED lights on speaker C SEED control box Plug and switch on the C SEED control box No movement Wifi connection Check if connected to your wifi Wifi connection Check if movement happens when manually driven...
Page 18
The symbol on the packaging indicates that the packaging is made of PAP. 10. WARRANTY Contact your C SEED dealer before returning the product. The warranty covers 24 months from the date of purchase. The defective amplifi er, Control Box or receiver must be sent to the dealer within 2 weeks.
Page 19
C SEED 125 SPEAKER APPENDIX I - DECLARATION OF CONFORMITY EC declaration of conformity (DoC) of the machinery Declaration according to Directive 2006/42/EC, as amended (hereafter called Machinery Directive). This language version of the declaration is verified by the manufacturer (original declaration).
Page 20
Ing. Michael Lager Position: Maschinen -und Gerätesicherheit and that the following natural or legal person established in the Community is authorized to compile the technical fi le: Business name: C SEED Entertainment Systems GmbH Address: Gußhausstraße 21/25, 1040 Vienna Country: AUSTRIA...
Page 21
C SEED 125 SPEAKER APPENDIX II - RECOMMENDED SPEAKER SETUPS...
Required components Integrated Island 2 speakers 2 speakers Control box Control box Amplifier Amplifier Home Audio System Receiver Cable Cable ø 32 mm Conduit ø 32 mm Conduit 2 network cables 2 network cables XLR<->plug for connection to home XLR<->cinch cable audio system 2 speakers 2 speakers...
Page 23
C SEED 125 SPEAKER APPENDIX III - PIN PLAN PIN PLAN BARREL SPEAKER 230 V (L) 230 V (N) PE (earth) 24V + LED red LED green LED blue limit switch TOP 24+ limit switch TOP 0V limit signal UP...
Page 24
PIN PLAN CONTROL BOX 230 V (L) 230 V (N) PE (earth) 24V + LED red LED green LED blue limit switch TOP 24+ limit switch TOP 0V limit signal UP signal DOWN limit switch BOTTOM 24+ limit switch BOTTOM 0V limit switch PIN PLAN AMPLIFIER AUDIO 1+...
Page 25
C SEED 125 SPEAKER APPENDIX IV - SPARE PARTS Name Specifications Art. no Screw Disc CS.000.011 Inductive sensor CS.000.015 tower brushes CS.000.016 trapezoid nut CS.000.007 LED band top CS.000.002 LED band logo 1 CS.000.003 LED band logo 2 CS.000.004 front fabric cover...
Page 27
C SEED 125 SPEAKER APPENDIX V - INSTALLATION PLAN...
Page 28
APPENDIX VI - CABLE SPECIFICATIONS LAPP ÖLFLEX CLASSIC 110 CY No. of cores and mm2 Outer diameter Art. no Audio 4 G 4 13.4 1135504 Power 3 G 2.5 10.3 1135403 Data 18 G 0.5 13.3 1135018...